Linen Trousers for Summer

Just after I finished my BTS outfit, I decided to panic sew 2 pairs of loose linen trousers for a couple of days in Hastings immediately after the concert. Sometimes I need a deadline, what can I say?!

Both linens were from Sew Me Sunshine. I bought the green-blue one first, then saw the pink-yellow colourway and thought I would have things in my wardrobe that would go with both of them – not least my massive collection of white t shirts!

I used my favourite elastic waisted trouser pattern, the Ardens from Helen’s Closet. I made the size 14, having previously made the size 6 for my previous pairs, as I wanted them to be looser. I also made the legs wide instead of straight/tapered. I didn’t write down how much I widened them by, but I cut up the centre of the leg pieces following the grainline and spread it, adding some more paper into the triangle I’d created.

I did end up wearing both pairs for out mini break in Hastings, playing mini golf – the world champion course is in Hastings apparently, going up and down the 2 funicular railways, eating fish and chips and exploring the lovely old town (and finding Foyle’s house from Foyle’s War!). They kept me nice and cool in our very hot Summer, though they’re not ideal for cycling in as my cycle clips are a bit rubbish – need to get some new ones!

My outfit for seeing BTS!!

My sister and I were lucky enough to get tickets to see BTS on their current tour when they came to London back in July (after quite a lot of stress trying to get through the massive queues for tickets!). And of course I had to make a new outfit! I went through a couple of ideas, then I saw a woman on Instagram wearing fringed trousers and a cropped sequinned top and I knew that was my winner!

I used the Grainline scout woven tee for the top, as I didn’t fancy the added complication of trying to sew stretch sequinned fabric. Speaking of the fabric, it was from Minerva – it’s their Phoebe sequinned fabric, which is super apt as that’s my sister’s name!

I made the size 6 of the top. When I made this a few times very early in my sewing journey, I made a smaller size but it always felt kind of restrictive on the shoulders so I went up a size or two. I lined it with the same pink fabric as the trousers (from Dalston Mill, more below) and did make quite a few adjustments. I raised the neckline by 3cm as I felt it was a bit low for the vibe I was going for. I also took 7cm off the hem and added 7cm to the sleeve length (which turned out to be kind of pointless).

Even after taking 7cm off the hem (from vaguely holding it up to myself to guess the length I wanted), I had to take another 12cm off the hem in total – I cut off 10cm and folded up 2cm. I hemmed the sleeves by 5.5cm (cutting off some of the fabric so it wasn’t too bulky), so they only ended up like 1.5cm longer than in the original pattern, lol! And I took the side seams in my 3.5cm from the armpit down, trimming off the excess so as to reduce the bulk.

Now onto the pièce de résistance, the trousers! So that I didn’t have a repeat of the stress of making a whole tuxedo in a month, I made sure to start the trousers way earlier than the concert. I started ordering supplies in February, though started the sewing in April. It was really hard to find fringe, so I ended up ordering it from amazon. I would have preferred to have supported a fabric shop but c’est la vie. As I mentioned above, the pink fabric for the backing was from Dalston Mill. I do really like their basic cotton range – it’s really nice quality and comes in an amazing range of colours. I used it for the 2 Summer dresses I made last year. I ordered all their pink cottons as samples, and went for the baby pink as the best option for the backing of the sequins and the fringe.

I used the Liesl & Co Hollywood trousers pattern, the same as for my tuxedo trousers as I knew the size 6 fitted me pretty well. I briefly considered trying to add a pocket but thought that way madness lies! I didn’t to the fly front, and instead put an invisible zip on the side. I didn’t have a matching one so it was grey, which you could just about see at the top, though I did use some old pink nail varnish to colour the pull tab thingy.

I did some basic calculations to work out how much fringe I would need and I thought one 10 yard pack would be enough but I actually needed 2 and used most of the second one too! I think I must have put the layers closer together than I anticipated to make them look more full. The fringe is 4″ long, and I did them about 2 inches apart. I started at the top, to make sure it was all straight just under the waist band, and it was surprisingly difficult to keep it straight! I tried to draw a bunch of lines at once, but it ended up being more efficient to do them one at a time, based on the row above.

I used the same construction method as for the tuxedo trousers when I was adding the stripe. I sewed the side seams (and inserted the zip in the left one) but left the inner leg seams unsewn, so that I could have flat legs to sew onto, once the fringe was no longer going all the way round. For the layers above the crotch, I sewed from one side of the zip, all the way around to the other side of the zip, so the rest of it was seamless, as it were.

It took a good few weekend days to sew on all the fringe, but as it started to take shape, I was really excited by how well it would move! I felt a bit self conscious while walking to the tube as, although there were a lot of fans, a lot of them were in merch, but once we got to the Spurs stadium, a few people said they liked my outfit, so that was lovely.

Not sure where I’ll get the opportunity to wear this outfit again. Maybe just for a trip to McDonald’s or something, lol! I can’t post videos here, I don’t think, so make sure you follow me on Instagram as I’ll post a video of the trousers in motion.

Phoebe made her outfit too! A hanbok inspired skirt (self drafted) with 3m of fabric! And a Sourdough top by sewbakemake which she made less swingy at the bottom and left off the hem facing, because she appliqued the Arirang album logo on to it.

Navy Arden Pants mark 2

This is my last pair of Arden Pants which I made in a batch last year, to replace the pairs I made during lockdown. Though, as always I have more pairs planned when I have a tried and true pattern.

As always I made the size 6, and as I mentioned in the post about the mustard pairs, they seemed to come up a bit small this time. So since I took these photos, I unpicked them and sewed them with a smaller seam allowance to give me a bit more room. I have also printed the pattern again and cut it out 2 sizes up. I’ve got some wider legged Summer trousers planned and I want them to be nice a loose everywhere.

The fabric was the linen ramie from Dalston Mill, if memory serves, as it was a good while ago that I bought it. IAlso I didn’t make shorts, like I did of the mustard ones as I made some navy shorts a while before, from the offcuts my sister gave me.

2 Yellow Archer Shirts

I’ve still apparently got a bunch of shirts to share here which I made early last year, in time for my trip to South Korea in April/May! I think I’ve shared some pink ones – plain and stripey and now I present yellow/mustard – plain and stripey!

The fabric is the trusty chambray cotton from Fabrics Galore, which I’ve bought in basically every colour that’s in my palette at this point. These are the plain and striped ones in turmeric. It’s the perfect weight for shirts and sews up really nicely.

As with all my recent shirts, having finally traced the archer in a bigger size, these are the size 8 (having previously made the size 4). I’ve made the archer so many times that I pretty much don’t need the instructions any more, which does make it a bit quicker for me to knock one of these out. I just have to check the seam allowances in a couple of places, and which side to iron on the interfacing to make sure you don’t end up with 2 right sides (or left sides, can’t remember).

I do still have some more of this batch of shirts to share from the same sewing marathon ahead of my trip! Can’t believe I’ve not posted them already. Also full disclosure, I had some more shirts cut out and have so far sewn up 3 of them, between Christmas and New Year, so there will be a lot more shirts eventually making their way onto my little corner of the internet here.

I made some more Ardens

I think it was during the first lockdown that I made my first pairs of Arden Pants, out of some double gauze, which wasn’t the most suitable fabric. It was too floopy so finally this year I decided to replace those pairs (in navy and mustard) with some new ones, made from linen ramie from Dalston Mill.

I made the same size I’ve always made before, the size 6 but they feel quite snug this time. I think the fabric choice does make a difference, but I’m not sure why these ones feel not as loose and breezy as I wanted.

I think I need to bite the bullet and print of the pattern again, a size or two larger to get a looser fit. In the mean time, though, I’ve been sitting in front of the TV unpicking the seams to sew them with a smaller seam allowance, to hopefully make them a bit less tight! I could also only get slightly wider elastic than the pattern calls for, so I widened the waistband to accommodate this. But the elastic is really strong (?) and I didn’t leave enough slack to loosen it very much. I loosened them as much as I could, but they’re still a bit too tight, so I think I’ll replace it with the proper elastic (of which I have loads now).

At the same time I made the trousers, I did make another pair of the shorts, using Helen’s hack. I obvs have my pattern pieces ready to go, but again I may have to revisit the fit of these and do the hack again.

We had a pretty good Summer this year, but I didn’t get a chance to wear the shorts as I feel a bit weird wearing shorts to work, so the weekends don’t necessarily give my much opportunity to wear all the shorts I’ve made in the past, let alone new pairs!

A Pair of Pink Archers

When I went to Korea back in April/May (I can’t believe it’s so long ago!) I had a mad weekend of sewing a bunch of shirts to take with me – which you will have seen on my instagram if you followed my ootds from my trip.

I made them all in the size 8, after tracing the larger size for my batch of white shirts. There really isn’t much to say about the archer shirt since I’ve made so, so many! Though I did get faster at making them, having done a sort of assembly line.

At this point I must have ordered every colour of the cotton chambray from Fabrics Galore – though I haven’t checked for a while, so maybe there are some new colours now! This is the blush pink and the pink stripe.

I decided to write all the text at the top as there are too many photos to spread it out between.

Having realised I made 12 pairs of Carolyn Pyjamas, I think I need to add up the number of Archers I’ve made (once I’ve shared them here, and embarrassingly I have a couple more cut out which I haven’t sewn up yet) as it’s definitely more than 12! I did get rid of some of the ones I’ve made, but I assume they still count!

I made a Tuxedo!

Making myself a tuxedo has been on my bucket list for a couple of years – since I last went to the Dressmaker’s Ball. I was going to make one last year for my 40th birthday, in Reykjavik but made a coat instead when it became clear I wouldn’t have enough time.

Luckily I did do some work on the patterns a year ago, but I still could have done with another weekend! I did order all of the fabric in plenty of time, though, so at least that was a good move!

The fabrics were:
White pique (shirt) from Croft Mill
Black lining (waistcoat) from Croft Mill
Merino wool (trousers, waistcoat & jacket) from Dalston Mill
Satin twill (lapels, bow tie, trousers stripe) from New Craft House
Blue silk (lining trousers & jacket) from Thailand

The first part of the ensemble I made was the shirt. I did a bunch of research about tuxedos and decided I wanted a wing tipped collar. I made 2 versions as I used this YouTube tutorial but realised after I’d sewed it on, that a) it was too shallow and b) you need a bit of overlap underneath the wings, otherwise they overlap and they should just meet. So I added a couple of cm to the height and had the curve of the collar stand then drafted the wing off that a bit further apart, if that makes sense.

I used my old fav, the Grainlint Studio Archer Shirt, as the base pattern, btw. I used the original size 4 which I used to make before I started making them oversized.

I also wanted French cuffs. I did some research and found (I’m 90% sure) this video about how they should look. I doubled the width of the standard square cuff on the archer and found that the outside layer should be slightly wider and longer to cover all of the stitching of the underneath layer so I made it 1/8 inch bigger to do this. Lining up all of the buttonholes for the cufflinks was stressful af, but I managed it – you have to line up 4 on each cuff!

Obvs the other main change is the pintucks which I added to the fronts. I did 1/8 inch wide pintucks with the same in between the tucks. I tested some sizes on paper and thought this looked the best. It took sooo long to draw all the lines on the pattern that I only did it on one side, so I just did the same one on both sides, rather than the 2 different sides that the archer is drafted with. To be fair, if I thought it was slow drafting the pattern, it was even slower marking all the tucks on the fabric (which ended up not 100% straight, but it was good enough. It also was quite slow to sew them all. Thankfully I earmarked a full weekend to make the shirt.

Obvs I had to make a bow tie! Though I lost the pattern from before, so I traced off the pattern from the one I made before as I was doing too much pattern fitting and hacking to have the brain to figure it out again from the start!

Did you know by the way, that traditionally the top 4 buttons on a tuxedo shirt are replaced with studs, excluding the very top button under the bow tie. Sometimes they have a button, then a second tiny buttonhole for the stud, but I just did buttonholes on both sides for the studs.

The trousers are the Hollywood Trousers by Liesl & Co. I wanted a zip fly and front in seam pockets so that adding the stripe down the side wouldn’t mess with the pockets. Speaking of the pockets, I used my bright blue ‘silk’ from Thailand 2 years ago – I say ‘silk’ because I suspect it was very synthetic. There is also a fly lining piece, which is also blue.

I originally cut out the size 2 a year ago, and I now have no idea why! When I put on the toile again this year, the fly literally wouldn’t meet, lol. I printed off the pattern again, and made the size 6 as it matched my measurements exactly.

The only hack is that I added the traditional satin stripes down the outside of the legs. I cut out pieces 5cm wide, and 116cm long (which was the length of the outside leg, obvs). The 5cm width, minus 2 lots of 1.5cm seam allowance left me with a stripe 2cm wide. I sewed them into the side seams, then pressed the other seam allowance under to stop stitch it down. I considered topstitching the other side, too, but decided against it. I had to change the construction order, and did the inside leg seam after the side seams so I could get the stripes in to topstitch them.

I didn’t, somehow, write down how much I had to take up off the hem. I did have to take a good lot off as I’m short (5’3″) and patterns are always drafted for, like 5’6″ tall people. I had learnt my lesson, though, and hemmed them with the shiny shoes on that I bought for the outfit. I have hemmed trousers in bare feet before, then when you’re in shoes, they’re a bit too short, it’s so sad.

I guess the other ‘hack’ I did was to sew some extra buttons on the inside of the waistband to attach these braces I bought. They also made me feel confident that I didn’t have to overfit the waistband of the trousers, as the braces would hold them up if they weren’t super snug. I find it hard to fit trousers so they feel secure when I’m standing up, but also comfortable to sit in.

The next thing on the list was the waistcoat. I had originally wanted to add little lapels, but knew I was too short of time. I would also have added back a dart from the armpit, as was in the original pattern, before I took sooo much fullness out that the dart disappeared.

I do feel with the waistcoat on, it’s giving waiter vibes, though, sigh.

The pattern I started with was Burda wool waistcoat, 119. I don’t think I’ve actually made a Burda pattern before, and I was prepared for the instructions to be sparse, but they are very very limited. There are no photos and I’m definitely a visual learner, so I used YouTube videos to remind myself how to make the welt pockets. Which have the shiny fabric as the welts for a little touch of luxury.

The original pattern was quite loose and oversized, so I had to take a lot of excess out of it. I took an extra 1cm – 1.5cm seam allowance off all the seams, and took some width out of the back. I originally made the size 36. I also wish I’d had time to unpick it a but to add darts into the back, to make it a but more fitted in the small of my back.

I used this blog tutorial to tell me how to line the waistcoat with all the seams enclosed. I didn’t even try to use the original instructions, I just went for a tutorial with clear step by step instructions and photos! I think part of the problem with the Burda instructions is that there is a big block of text that covers multiple steps and I’ve realised, mostly from getting into a mess with the jacket, that I don’t do well with those kinds of instructions. I guess we’ve all been spoilt with the indies!

The jacket, as I mentioned above, did not come together smoothly. I got into my head on the Sunday before the trip I was making this for, and could not figure out how to construct the collar. I’ve made 2 Traveller Coats, and I think 4 or 5 jackets, and they’re all constructed in the same way, but I just couldn’t do it. I put it away and thought about it over night and then did it straight away on the Monday evening (I was travelling on the Saturday for my birthday trip to Vienna).

The pattern was the Burda tuxedo jacket, 129, which I made in the size 36. It was sort of double breasted originally, with a point in the middle for just enough overlap for 2 buttons. I wanted the front to be straight, so I drew a mostly straight line down from the point. It wasn’t quite straight enough from the first hack, so I did it again and angled the front outwards rather than adding more width at the front edge. I made the same adjustments to the facing pieces, which are obvs in the shiny satin fabric.

Oh, I also made a pocket square from the shirt fabric, while I was making the shirt. It turns out there are loads of ways to fold these but we were in a hurry on the night, so I fudged it a bit. Some of the folds are super complicated, I kind of love that little bit of individuality you can put into menswear.

One detail I thought would be total fluke whether it worked or not, is that the shirt cuffs are supposed to peek out from the sleeves of the jacket. They might stick out a little too much in my case, but at least they do show.

I do love the bright blue lining! It shouldn’t show inside the welt pocket, below, but I messed up the spacing on one of them, and they don’t have a facing, so it’s just the blue that shows. The pattern did have a pocket flap, but I didn’t want to add them as I wanted a more sleek look, but maybe in retrospect it would have hidden some sins, lol!

I did think about topstitching the collar around the back neckline, as it is quite bouncy. I pressed it so many times, and it’s wool so it should have pressed well. Oh well.

I made this tux to wear to the opera for my birthday trip to Vienna. We had a mini photoshoot in the Vienna State Opera, though I felt quite self conscious because there were loads of people walking up the stairs! Though one nice chap said I looked great, and looked suitably stunned when I said ‘thanks, I made it!’

I meant to take an ‘after the party’ shot with the tie untied, and the sleeves rolled up on the shirt, but I forgot in the end, so here is me looking kind of smug about my finished tuxedo!

Now I need some other opportunities to wear this again – and maybe I would make the couple of small tweaks for the next time (though let’s be honest, probably not, lol). Would it be too much to wear it to my work Christmas party!? I did tell a lot of my colleagues I was making it as it was all I could think of for over a month!

A Pair of Rectangle Dresses

After the fail of my Hallon dress, I wracked my brain to find an alternative for my dress to wear to my friend’s 40th birthday party in Hamburg and thought Daisy DIY’s Gathered Rectangle Dress could work, with a bit of hacking from my first version. Oh, and obviously I made 2 versions because why not?!

I took 3cm off the height of the front bodice piece as I felt it was a bit high on the first version and I adjusted where the side seams were on the bodice, by adding 4cm to the front, and taking it off the back. I have a very narrow back, so on the first version the side seams were tipped a bit too far forwards.

I decided to do the straps differently, by not doing the loops on the back. I did 2 sets of straps, to tie on the shoulders. The straps were 50cm long and 4cm wide.

I obviously added pockets, from the Emery Dress, but I rounded off the top as they’re flat to be sewn into the waistband of the emery. I put the pockets 17cm down from the waist seam – after some trial and error to check the placement.

The skirt was made from 2 full widths of the fabric, which meant I didn’t have to neaten the seam allowances as they were the selvedges. Win! If memory serves, the length of the skirt was 90cm but I did have to fold up a 4cm hem twice as they were dragging on the floor after one hem.

I used the premium cotton from Dalston Mill, the same one I used for the Hallon Dress, but obvs in different colours. I bought white (obvs) and dusky pink. I wore the pink one to the party. I made them a bit late in the Summer so I didn’t yet get a change to wear the white one. Like with my black shorts (and some other shorts I haven’t yet blogged) I think I need to have a holiday somewhere warm to make sure I can wear both of these at some point.

I’m so glad I managed to make dresses that lived up to my vision of a floaty maxi dress and using a ‘pattern’ I already had. Shame I’ll have to wait a year to wear them realistically.

Blue Hallon Dress (my first fail in a while)

For the first time in a long time, I wanted to make and wear a dress. The occasion was my friend’s 40th birthday so I obviously had to make a new outfit!

As I’m sure you’ve noticed, I tend to stick to tried and true patterns so then when I try a new pattern, I’m have a false sense of security so then when it fails, I’m a bit fed up. Especially because I’ve been sewing for probably close to 15 years but I still make things that don’t match my mental picture.

That’s all to say, I like the back – and it was the reason I went for this pattern, the Paradise Patterns Hallon Dress.

I wanted to make a loose, breezy maxi dress so I decided to add some fullness to the front of the dress to have a bit more swish, with it not just being in the back. I made the size 4 and did make some tweaks. I lowered the neckline by 5cm as it was a bit strangley, I straightened the hem as it was a bit high-low. I also added pockets, which I stole from the Emery dress. I did a lot of trial and error and sewed the whole thing 3 times really. And still didn’t like it – the front is just meh. I guess there’s a reason why the front of the pattern is quite sleek, to balance out the fullness of the back.

The colour choice I think was also not ideal – it looks a bit like scrubs. It’s nice quality cotton from Dalston Mill, in Sky Blue. It’s not the fabric that’s wrong, I think it’s the sack-y nature of the front coupled with the colour which made this dress not ideal. The fabric won’t go to waste, though, as I’ll cut it up to make my first quilt, hopefully later this year.

I guess I should be grateful I don’t have fails very often, though I do feel a bit frustrated that I spent time and fabric making something I will never wear. And one of the things I love about sewing is I can have an idea in my head, and make it – it’s not super often when it doesn’t come to fruition like I imagined, but it’s sad when it does.

Black Linen Arden shorts

Ages ago I made some black cotton linen blend Arden trousers and since then, I’ve thought ‘I could do with some shorts for the really hot weather’ though we don’t often get shorts weather for a prolonged period in the UK, so I’m not sure what I was thinking! I definitely have more shorts in my wardrobe than I could possibly wear, unless I go on a tropical beach holiday or something. Aaaanyway….

I finally made some black Arden shorts, using the hack on Helen’s blog which I used before. The fabric is linen ramie from Dalston Mill, which is one of my favourite shops for good quality fabric in lots of colours. Stay tuned for more pairs, in other colours, lol. I can never make just a one-off it seems!

I made the size 6, as always, but this time I did make a tiny tweak to the pattern. I couldn’t get the right width of elastic (38mm) so I bought some wider elastic, I think 5cm wide. I therefore had to add some height to the 2 waistband pieces to make sure the elastic could actually fit. I didn’t fully realise the new elastic is really strong, though, so I did have to let the elastic out as far as it could go (i.e. having hardly any overlap) so make them not so squeezy around the middle. I do now, actually, have a load of the correct width of elastic as I stocked up, so I could replace it but meh. They’re finished now, and I already unpicked the waistband once, I’m clearly never going to get around to replacing it now!

I think I only actually wore these once, when I got my long-awaited second tattoo. You can’t actually see it when I’m standing, but you can when I’m sitting. I got a whale (what else) on the front of my right thigh and I love it! My 2 friends, with whom I have the matching teapots, got their second (and more!) tattoos long before me and they said ‘you’ll get addicted’ and I definitely feel like I want some more, but I’m not sure what of yet. I don’t plan on waiting 8 years before the next one this time, though!